This will save you $800! her voltage regulator is situated inside that the PCM. Currently I will present you how to install an outside voltage regulator. Full cost $25.40


*

This is all you need!


*

Disconnect the battery


*

Remove the battery.

You are watching: 2000 jeep grand cherokee voltage regulator


*

Locate the blackbox connector on the back of the alternator.


*

Disconnect the black box connector.


*

Now take 2 barrel, and also eyelets connectors and also two lengths of wire long enough to walk from the voltage regulator to the alternator. Connect a barrel and also then Eyelet connector come the finish of every one.


You will additionally need to add a length of wire to the barrel finish of among the wires. This cable will connect to a 12 volt source. You will require to uncover the positive field on the alternator.


*

The wire with the battery wire connected to that goes come the peak terminal the the voltage regulator. This is really important if you choose the not correct terminal you will certainly pop the voltage regulator.


*

Now attach the wires come the voltage regulator and also then reinstall your battery. Make certain you plug the wire v the battery voltage come the peak terminal.

See more: Watch Mobile Suit Gundam F91 English Dub Online Free In English Dubbed


Once you have actually reinstalled her battery you can connect wire coming from the peak terminal that the voltage regulator come the battery.


1.0 Voltage regulator2.0 Barrel connectors1.0 electric tape3.0 Eyelets3.0 self tapping screws4.0ft 14 gage wire1.0 cable crimpers Hand tools1.0 Alternator battery tester