Changing the oil yourself is easy and saves you a couple of bucks each time you do it. Follow this an easy step-by-step, together we go you v this essential part of Jeep grand Cherokee maintenance. Girlfriend will discover the procedure gets simpler over time and you"ll have a feeling of satisfaction that the job is done right.

You are watching: 2001 jeep grand cherokee oil change


This article uses to the Jeep cool Cherokee WJ (1999-2004).

If something is the life blood of her Jeep, it"s the oil. Oil lubricates the engine, including the pistons, cylinders, valves, and also the valve train. And also like any essential fluid, it works finest if it"s clean. The manufacturer recommends transforming your Jeep"s oil every 5,000 mile or every six months, whichever comes first. (Synthetic oil users deserve to wait as much as 7,500 miles in between changes.) The tools and equipment you"ll require are minimal, and the investment in time and also money is additionally small. Plus, ~ you"re done, you"ll have the satisfaction of understanding there room no leaks and the task was excellent correctly.

*

Materials Needed1/2" open-end or box wrenchOil filter removed tool5 quarts oilNew oil filterJack or liftFunnel (optional)Jack was standing (optional)Oil drain pan

Choose synthetic or organic oil. The manufacturer proposal 5W-20 load oil (10W-40 for a high calculation motor).

Step 1 – gather materials

Before friend begin, conference the products you will must do the job.

*
Figure 1. Several of the products you"ll need (left come right) are 5 quarts the oil, a funnel, a new oil filter, an oil-filter removed tool.
Pro Tip

You may (or might not) have the ability to remove the oil filter from the Jeep without an oil filter remove tool, yet it is a handy item to have actually if you require it and it prices only a few dollars.


Step 2 – Jack up the vehicle

Set the parking brake and/or placed the Jeep in gear. If you have actually an hydraulic jack, usage it to jack increase the auto (or usage a tires jack). Use jack stands come stabilize the Jeep.

*
Figure 2. Hydraulic jack supplied to jack increase the vehicle.
Pro Tip

To stop serious injury or death, always use extreme caution as soon as working underneath a vehicle suspended on a jack or on jack stands.


Step 3 – eliminate the oil pan plug

Place the drainpipe pan underneath the oil pan. Situate the oil pan and plug. Usage your 1/2" wrench to loosen the plug.
*
Figure 3. Wrench top top plug.
Pro Tip:

Finger in illustration (above) points the end the exhaust pipe the is hot. Allow your car to cool down fifty percent an hour before you begin the oil change.


Once the plug is loose, remove the wrench. A small amount the oil will begin to drain into the drain pan in ~ this point. Through your fingers, store slight push on the plug and also hand-remove the oil plug. You deserve to feel the plug together it starts to loosen.When that is really loose, traction the plug towards you and away native the oil pan. Allow the oil to circulation into the drainpipe pan. Note: friend will get some oil on your fingers.
*
Figure 4. Oil flowing out of oil pan into the drain pan.Allow all of the oil to drainpipe out of the oil pan. After all the oil has actually drained from the pan, change the oil plug and also snug it down through your 1/2" wrench. Do not over-tighten, or you will strip the subject on the pan.
*
Figure 5. Change the oil plug.
*
Figure 6. Snug down the oil plug v the 1/2" wrench.
Pro Tip

Dispose of provided oil and the old oil filter in accordance with local and state environmental laws.


Step 4 – remove the old oil filter

Locate the old oil filter under the engine.
*
Figure 7. Oil filter, located underneath the engine.Place the oil drain pan underneath the area where oil is likely to flow after you ease the oil filter. Loosen the filter; usage the oil filter removal device if needed.
*
Figure 8. Loosen the oil filter and allow the oil to circulation into the drain pan.Place the old oil filter right into the drain pan with the used oil.
*
Figure 9. Ar the offered oil filter into the drainpipe pan.

Step 5 – Install new oil filter

Before installing the new filter, dip her finger into some new oil and also smear the onto the filter"s gasket. This keeps the gasket pliable and makes because that a far better contact v the filter mountain on the engine. It also can assist prevent leaks.
*
Figure 10. Lubricated the oil filter gasket.
*
Figure 11. Location of oil filter mount on engine.Grab the new filter and screw that onto the filter mountain on the engine. Hand-tighten only, around a 3/4 turn. Do not use the oil removal tool to tighten the filter—doing so will tighten the filter also much.
*
Figure 12. Mountain the brand-new filter.

Step 6 – Add brand-new oil

Locate the oil to fill cap ~ above the engine.
*
Figure 13. Oil to fill cap in the engine compartment. Eliminate the cap and insert the funnel. Girlfriend may notice some yellow material on the underside of the oil cap. This is nothing to concern about; the is a small oil that bubbled up from the oil pan and also oxidized.Pour in 5 quarts the oil.

See more: Is There A Pressure Point That Makes You Pass Out, Which Pressure Points Make You Faint

*
Figure 14. Pour five quarts that oil right into the engine.Replace the oil cap.Lower the vehicle.Start the engine and also check under the Jeep for leaks. If there space no clearly shows leaks, you"re done.

Featured Video: exactly how to change Oil