A 72Pin SIMM has 72 pins on the bottom the the circuit board, 36 on each side over there is a notch cut in the bottom that the circuit board in the mi dd le. These modules measure up 4.25 inches long. Since the notch is not focused they can only be put in one way.
72-pin SIMMs are uncovered in older desktop 486 and Pentium computers. Each 72-pin SIMM gives a 32-bit data path, so they deserve to be set up alone in 32-bit systems (486 models) however must be installed in pairs in 64-bit Pentium or AMD Athlon systems. They are easily accessible in FPM or EDO.
The DIMM is larger than one of two people of the SIMMs. Lock contain 168 pins top top the bottom that the circuit board. There space two notches ~ above the bottom of the board and they must be aligned appropriately in order because that them to it is in inserted. These storage modules are mainly used in more recent computers and also can be inserted one in ~ a time unlike the SIMMs, which have to be put in pairs.
168-pin DIMMs are uncovered in Pentium and Athlon systems. Every 168-pin DIMM gives a 64-bit data path, for this reason they are mounted alone in 64-bit systems. 168-pin DIMMs are available in FPM, EDO, PC66, PC100 and PC133.
The variety of chips on a 168-pin DIMM may vary, however they have actually 84 pins top top the front and also 84 pins on the back for a total of 168. 168-pin DIMMs space 5.375″ long and also 1.375″ high, and also the heights might vary. They have two little notches within the heat of pins follow me the bottom of the module.
You are watching: How many pins does a simm have
184-pin DIMM DDR
The DIMM is larger than either of the SIMMs. Lock contain 184 pins top top the bottom that the circuit board. There is one notche top top the bottom of the board and it have to be aligned properly in order for them to it is in inserted. These storage modules are mostly used in more recent computers and can be put one in ~ a time uneven the SIMMs, which have to be inserted in pairs.
184-pin DIMMs room for DDR SDRAM modules discovered in Pentium III and also 4 and also Athlon systems. Each 184-pin DIMM provides a 64-bit data path, therefore they are installed alone in 64-bit systems. 168-pin DIMMs are easily accessible in PC2100, PC2700, PC3200 and also PC3500 and also later..
The variety of chips on a 184-pin DIMM may vary, however they have 92 pins top top the front and 92 pins top top the back for a full of 184. 184-pin DIMMs space 5.375″ long and also 1.375″ high, and the heights may vary. They have one little notche within the heat of pins follow me the bottom the the module.
184-pin Rambus RDRAM RIMM
Features High speed 1066, 800, 711 and 600 MHz RDRAM warehouse 184 leaf connector pads through 1mm pad spacing best module PCB size: 133.5mm x 31.75mm x 1.37mm (5.25″ x 1.25″ x 0.05″) every RDRAM has 16 banks, because that a full of 256, 192, 128, 96, or 64 financial institutions on every 128MB, 96MB, 64MB, 48MB, or 32MB module respectively yellow plated sheet connector pad contacts Serial presence Detect (SPD) support Operates indigenous a 2.5 volt it is provided (±5%) short power and power under self refresh modes Separate Row and also Column buses for higher efficiency
RDRAM delivers pure performance whereby it problem most: leading-edge applications. Even if it is on multimedia, network packet switching, contents creation, etc., RDRAM unleashes the processing power of your system. High-bandwidth RDRAM is crucial to drive peak performing processors. RDRAM gives a flexible solution to accomplish bandwidth demands of tomorrow’s high power systems. RDRAMs system solution scales conveniently from 800Mhz come 1066Mhz to 1200Mhz. Additionally, commodity RDRAM components are configurable in a variety of RIMM module configurations from 16 come 32 and also 64 little bit data busses. This RIMM module solutions sell up to 9.6 GByte/second of storage performance if retaining typical PC kind factors.
A dual inline memory module (DIMM) consists of a variety of memory components attached to a published circuit board. The yellow pins top top the bottom of the DIMM administer a connection in between the module and a socket on a published circuit board. The pins ~ above the former and ago of a DIMM room not associated to each other.
DDR2 SDRAM use 240-pin DIMM sockets for desktop computers. Every 240-pin DIMM offers a 64-bit data path (72-bit for ECC or registered modules), for this reason they are installed one in ~ a time in 64-bit systems. DDR2 chipsets space expected to assistance dual-channel memory, giving a 128-bit data path.
240-pin DIMMs are accessible in DDR2 or DDR3 SDRAM.
Memory modules (Unbuffered, Registered, tiny Outline DIMMs) have a unique “key” or notch in your connector. These tricks must align through a vital in the storage socket to permit the module to it is in inserted. All DDR3 and DDR2 module species are keyed differently.
To use DDR2 memory, your device motherboard must have 240-pin DIMM slots and a DDR2-enabled chipset. A DDR2 SDRAM DIMM will not fit right into a typical SDRAM DIMM socket or a DDR DIMM socket. DDR2 modules use a 1.8V power supply, providing a huge power saving over the 2.5V DDR modules.
To usage DDR3 memory, your system motherboard must have 240-pin DIMM slots and also a DDR3-enabled chipset. A DDR3 SDRAM DIMM will certainly not fit into a typical SDRAM DIMM socket, DDR DIMM socket or DDR2 socket. DDR2 modules use a 1.5V strength supply, providing a big power saving over the 2.5V DDR modules or 1.8V DDR2 modules. DDR3 is the next generation of twin Data rate (DDR) Synchronous Dynamic Random access Memory (SDRAM). The is an evolution of DDR and DDR2 memory technology that delivers higher speeds, lower power consumption and also heat dissipation.
The number of components on a 240-pin DIMM may vary, yet they always have 120 pins top top the front and also 120 pins ~ above the back. 240-pin DIMMs are about 5.25″ long and 1.18″ high, despite the heights may vary. While 240-pin DDR2 DIMMs, 184-pin DDR DIMMs and also 168-pin DIMMs are roughly the very same size, 240-pin DIMMs and 184-pin DIMMs have only one notch within the row of pins. The notch in a 240-pin DDR2 DIMM is slightly more toward the facility of the module.
A dual inline storage module (DIMM) is composed of a number of memory chips that room attached to a published circuit board . The gold pins top top the bottom the the DIMM administer a connection in between the module and also a socket on a larger printed circuit board. The pins top top the former and back of a DIMM room not connected.
100-pin DIMMs are ussualy used in printers. The number of black chips top top a 100-pin DIMM deserve to vary, however it always has 50 pins top top the front and also 50 pins ~ above the back, because that a complete of 100. 100-pin DIMMs are approximately 3.5 inches long and 1.25 inches high, and the heights might vary. They have actually two small notches in ~ the row of pins follow me the bottom that the module.
172-pin MicroDIMM DDR
The variety of chips on a 172-pin MicroDIMM deserve to vary, however they constantly have 86 pins on the front and 86 pins top top the ago for a total of 172. 172-pin MicroDIMMs are approximately 1.67 inches long and 1.18 customs high, despite the heights have the right to vary. Unequal SODIMMs, MicroDIMMs perform not have any type of notches follow me the bottom leaf
214-pin MicroDIMM DDR2
The variety of chips on a 214-pin MicroDIMM can vary.. 214-pin MicroDIMMs are around 2.165″ long and 1.18″ high, despite the heights can vary. Unlike SODIMMs, MicroDIMMs do not have any kind of notches follow me the bottom edge and also uses a brand-new 2 piece kind of connector known as the ” Mezzanine Socket.
The SODIMM is a smaller sized version that the DIMM. Lock are mostly used in Laptop although they are used in some others choose the initial tray-loading iMac computer. They have actually a notch in the bottom that the circuit board, i beg your pardon is offset from the mi dd le, which makes inserting it much easier to line up.
144-pin SODIMMs are generally found in laptop computers. Every 144-pin SODIMM offers a 64-bit data path, therefore they are mounted alone in 64-bit systems. 144-pin SODIMMs are accessible in FPM, EDO, PC66, PC100 and PC133.
The number of black chips ~ above a 144-pin SODIMM might vary, but they always have 72 pins top top the front and also 72 pins top top the earlier for a total of 144. 144-pin SODIMMs are about 2.625″ long and also 1″ high, and also the heights may vary. They have one small notch within the row of pins follow me the bottom of the module.
See more: How Many Diagonals Does A 17-Gon Have If, How Many Diagonals Are In A 17 Gon Polygon
The SODIMM is a smaller sized version of the DIMM. Lock are mainly used in Laptop systems. They have a notch in the bottom of the circuit board, i beg your pardon is offset from the mi dd le, which renders inserting it much easier to line up.
200-pin SODIMMs are provided to carry out DDR SDRAM storage for laptop computers. Each 200-pin SODIMM offers a 64-bit data path, therefore they are installed alone in 64-bit systems. 200-pin SODIMMs are available in PC2100 and PC2700.
The number of black chips ~ above a 200-pin SODIMM might vary, however they constantly have 100 pins top top the front and also 100 pins top top the ago for a complete of 200. 200-pin SODIMMs are about 2.625″ long and also 1″ high, and also the heights might vary.
Approximately 2.6″ X 1.75″ (66 mm X 44.45 mm)
204-pin tiny outline double inline memory modules (SODIMMs) are the type factor supplied to carry out DDR3 memory modules for notebook computers and other small type factor computing platforms. 204-pin SODIMMs are currently obtainable in PC3-8500 (DDR3 1066MHz) speeds.
To usage DDR3 memory, your system must have actually both a 204-pin SODIMM slot and also a chipset the supports DDR3 memory. A DDR3 SODIMM will certainly not fit into DDR2 or DDR storage sockets.
SODIMMs space smaller and also thinner than consistent DIMMs, and also the 204-pin SODIMM PCBs are constantly ~2.6 inches long and are usually approximately 1.75 inches high (though the heights deserve to vary slightly). Lock consist the a number of memory materials (usually black) that room attached to a printed circuit board (usually green). The variety of memory components on a 204-pin SODIMM’s published circuit plank (PCB) deserve to vary, yet the PCB will constantly have 102 pins ~ above the front and also the ago both, for a full of 204 pins. The yellow pins on the bottom of the SODIMM provide the connection in between the memory module and also the memory socket.