Nicholl asked: How carry out I get super glue turn off eye glasses? i tried to resolve my glasses v super glue, however I obtained it on the lens. Mine lenses aren’t glass, they space plastic, so i can’t usage nail varnish remover since the acetone will impact the plastic. It’s cheap at sight glue. You re welcome help.

You are watching: How to get super glue off my glasses


There

*
room several determinants to consider before you attempt to remove the superglue: what product are the lenses, and do they have a coating on them (such together for UV protection). Look through the methods listed below to choose one the is for sure for your form of lenses, then follow the measures to eliminate the glue.

Removing the Glue with Water

This is the safest technique for lenses that have actually a coating top top them. Most adhesives, including superglue, deserve to be softened v water. It may take time, but it have the right to work.

You will certainly Need:

WaterAmmonia-free dishwashing liquidA soft clothPlastic wrapA soft cloth

Steps to remove the Glue:

Mix some ammonia-freedish liquid in water to do suds.Dip a soft cloth folded with each other in the soapy water to obtain it wet, then push it end the glue. (You might just soak the glasses in the key of water instead, yet that would also loosen the glue that you put on the lenses in the right place.)Wrap plastic wrap approximately the damp cloth to save in the moisture.Let the glue soak for number of (at least 3) hours.Remove the plastic wrap and also use the damp fabric to wipe turn off the softened glue.Every 15-20 minutes, re-soak the fabric with heat water and put it back on the glue.Do this as numerous times as necessary to soften the glue.If this method does not work, think about using the toothpaste an approach below. Number of site users have reported utilizing toothpaste ~ above coated lenses without any problems.When the lenses are clean, dried them through a soft fabric to prevent any kind of water marks and avoid having any kind of metal components rust.

Removing the Glue v Alcohol

This method is for sure for both plastic and also glass lenses. If your lenses have a coating on them, check this an approach along one corner edge very first to be certain it does not damages the coating.

You will certainly Need:

A soft clothIsopropyl alcoholRazor bladeMild soapWaterA soft cloth

Steps to eliminate the Glue:

Moisten a soft towel with isopropil alcohol.Use the cloth to rub off the glue. This may take some elbow grease. Rotate the towel to a new area as the adhesive is transferred to it.Several site usershave composed in to say that carefully using one of two people a razor tongue or a fingernail come scrape off the glue when it has softened a little works well. However, this should not be supplied for lenses that have actually a coating top top them as it will virtually certainly damage the coating together well. Also, be an extremely careful not to scrape the glasses v the razor blade.Clean the area afterward through a soft soap and water.When the lenses room clean, dry them with a soft fabric to prevent any water marks and avoid having any kind of metal components rust.

Removing the Glue v Acetone

This an approach is safe for glass lenses only. Perform not use this method on plastic lenses. If your lenses have a coating ~ above them, check this method along one edge edge very first to be sure it does not damage the coating. Because that glass lenses there is no a coating, this is the easiest an approach to use for removing the glue.

You will Need:

A soft clothAcetoneRazor bladeMild soapWaterA soft cloth

Steps to eliminate the Glue:

Moisten a towel with part pure acetone. This deserve to be purchase at either a hardware keep or in ~ a beauty it is provided shop. Acetone pond polish remover have the right to be used instead, yet it has other chemicals in it, for this reason it must not be offered with lenses that have actually a coating top top them.Rub the fabric over the glue until it is removed. This may take part elbow grease. Rotate the towel to a clean area as the glue is moved to itSeveralsite usershave composed in come say that closely using one of two people a razor tongue or fingernail come scrape turn off the glue once it has softened a little bit works well. However, this should not be used for lenses that have actually a coating on them as it will virtually certainly damages the coating together well.Clean the area afterward v a soft soap and also water.When the lenses are clean, dry them v a soft towel to prevent any water marks and also avoid having any metal components rust.

Removing the Glue v Toothpaste

This method is for sure for both plastic and glass lenses. Number of site users have used this method on coated lenses there is no damaging the coating. However, if her lenses have a coating, test this solution very first along a corner edge to be sure it does not cause any type of damage.

Many website usershave composed in to say that wetting the adhesive with heat water, then gently rubbing toothpaste end the glue with a cloth worked fine to remove the glue. It may take some time and also elbow grease, but dozens of civilization have had actually success with this method. Most people have offered plain white toothpaste, but there are gel toothpaste customers who have had success as well.Do no use any type of kind the toothpaste that includes ‘micro-scrubbers’ (the blue balls, etc.) together they can scratch the lens.

See more: 2000 Buick Lesabre Wiper Relay Location, Buick Lesabre (2000

Additional Tips

Several website users have had actually success removed the glue v a Mr. Clean Magic Eraser.Never use document towels to clean eyeglasses together they could cause scratches.The next time you should superglue her eyeglasses, covering the lenses very first with a item of plastic wrap or tape. That way, girlfriend can quickly peel turn off the tape once you have actually finished using the adhesive to remove it native the lens.If you desire to have actually your lenses repaired professionally rather than gluing them, a jewelry keep may be able to solder them back together for you if the component that broke is metal.

Sources

Fix It, Clean It, make It last by Gayle WoodJewelry Repair manual by R. Allen Hardy