The 1997-2006 Ford expedition models come equipped with a quick-connect fuel filter. The main responsibility the the fuel filter is to save any kind of fuel impurities indigenous entering right into the fuel injectors so just clean fuel renders it to the injectors and the engine. Replace the fuel filter between 60,000 and 75,000 miles. You have the right to purchase the quick-disconnect tool that friend will need for this task at most auto-parts stores.

You are watching: Where is the fuel filter on a 2003 ford expedition

Park the Ford expedition in a well-ventilated place that has a level surface. Communicate the parking brake to save the automobile from rolling.

Slowly remove the gas cap from the filler pipe on the gas tank. This procedure will depressurize the fuel system and prevent fuel indigenous spraying when the fuel present are gotten rid of from the fuel filter.

Slide under the driver next of the Expedition and locate the fuel filter, i beg your pardon is mounted to the structure rail directly in former of the gas tank. The fuel filter is a cylinder-shaped component v a quick-connect fuel heat coming the end of every end. On slide the drip pan under the fuel filter.

Insert the end of the quick-disconnect tool right into the finish of one of the fuel lines. Then, push the device inward right into the fuel line. This will certainly release the fuel heat from the fuel filter port. Pull the end on the fuel line at the exact same time that the tool is gift pressed inward. Traction the fuel line straight off the fuel filter port. Move the tool to the other fuel line and also repeat the process.

Loosen the clamp from around the fuel filter v a flat-head screwdriver. Note the direction the the arrowhead on the next of the fuel filter. The brand-new fuel filter will need to be positioned through the arrow pointing in the exact same direction. Then, pull the fuel filter out of the bracket and place it right into the drip pan.

Position the new fuel filter right into the clamp v the arrowhead pointing in the suitable direction. Tighten the clamp over the fuel filter with the screwdriver. Then, press both fuel lines straight onto the fuel filter ports until each heat locks in place. When the currently are pushed far enough onto the ports, the plastic clips will certainly lock inside of the fuel lines. Then, slowly pull outward on the fuel lines come ensure that each fuel heat is secured come the fuel filter ports.

Slide the drip pan the end from under the Expedition and also screw the gas cap ago onto the filler tube until it clicks.

Turn the ignition come the accessory position for about five seconds and then revolve it back to the off position. Repeat this a complete of 3 times prior to cranking the engine.

Crank the engine and also inspect the new fuel filter for signs of gas leaking around the fuel lines. Permit the engine to run for around 30 seconds. Then, turn the engine off.


The arrow that is imprinted ~ above the side of the fuel filter to represent the directgion the fuel circulation through the filter. The arrowhead must point toward the fuel line the is traveling to the engine.

See more: Cooking A Food In Liberal Amounts Of Water Is Least Likely To Affect The Vitamin Content Of:


No smoking cigarettes or open up flames about any form of fuel. Wear safety and security glasses or goggles once replacing the fuel filter. Refer to state and local regulations that pertain come the discarding of provided fuel and used fuel filters. Never ever dispose the fuel onto the ground.