Putting a car on jack was standing is the first step in several automotive procedures. It"s simple, however there"re a couple of pitfalls that might potentially be dangerous. The spare tires jack the comes through the truck need to only be offered on the jack points emphasize in the manual, but the rules room a small bit different if you"re to plan on utilizing a actual jack.

You are watching: Where to place jack on f150

About Jacks and also Jack Stands

All F-150s come through what"s referred to as a scissor jack. This lifts a truck by transforming a screw and also lifting the truck the way. While light, inexpensive, and useful for changing tires, they have actually a an extremely low load rating. F-150s and also F-250s generally weigh much more than two and also a fifty percent tons, making the scissor jack woefully insufficient for various other purposes.

Instead, investing in a party jack or a floor jack is a great idea. Bottle jacks are an ext compact however less stable as result of their tiny bases. Floor jacks are much easier to use and much more stable however tend come cost an ext overall.

Jacking increase the front End

The easiest and safest method to elevator a van is by jacking it up via the structure rail. The frame is the large, ladder-like, steel structure underneath the human body of the truck. There room rails follow me either side that stretch the size of the vehicle. Come lift the front finish of the truck for a tire readjust or any type of other work, location the jack under the frame rail. Rise the height of the jack till the auto is at the preferred height. Then, ar a jack was standing underneath the frame rail. Lower the van on the jack stand and remove the spare tire jack.

Figure 1. Background via the frame when elevating the prior end.

There space a couple of more alternatives when making use of a complete floor jack or party jack. Lifting via the regulate arm mounting suggest works, too. It"s not a "Ford approved" jacking point, yet it is solid enough to support the weight of the truck. Other sections of the prior crossmember will certainly work, too. Just keep in mind that the lifting points have to be stable. This is why lifting via the actual control arms is no recommended.

Figure 2. Encourage points for lifting on the crossmember.

Place jack stands under the framework regardless of exactly how the truck is jacked up.

Jacking increase the rear End

There"s one correct way to lift the rear finish of a truck using the spare tire jack. Place the jack underneath the rear axle on one of two people side. Background the truck by lifting the behind axle. Then, assistance the automobile by placing jack stands under the frame rail. Repeat this ~ above the various other side the the vehicle.

Figure 3. Execute not lift with the differential while utilizing a scissor jack.

Figure 4. Lift utilizing the axle.

An easier means is to lift the behind of the truck off the soil via the differential. This will lift both sides of the truck simultaneously and evenly. Easier way to lift the rear-end the the auto all in ~ once. The spare tires jack does no have the weight capacity for this. Only use a floor jack or a bottle jack.


Do not usage the spare tire jack come lift your truck at the behind differential housing. It does not have the weight volume for this background point.

See more: What Does A Red X On A Building Mean When You See It In The Hudson

Place the floor or party jack underneath the behind differential housing and also lift the entire rear-end that the truck that way. Place jack stands underneath the structure rail. Lowering the jack will also lower the axle until it will the bottom of its suspension.